MRI Google System

From Bangor Imaging Unit

Work in Progress (written by Martijn 01-03-11):

The MRI goggles are made by Nordic Neurolab. There is not a lot of documentation, so I will (try to) describe the way I have been using them. This is their PDF with details: Download file Media:NNL_VisualSystem.pdf

Step 1: Switch on the box at least 15 minutes before you want use them. For reasons unknown to me, the system does not seem to work (at least most of the time) for the first 15 minutes.

INSERT PICTURE

Step 2: Attach the Goggles to the head coil. Check all the connections

INSERT PICTURE

Step 3: Plug in the VGA cable into the stimulus PC. Make sure that you are using the correct resolution: 800x600. It will not work with any other resolution. You will have to check that the lights on the NNL boxes are on. This is a bit flaky. You might have to restart your stimulus PC several times before it works.

INSERT PICTURE

Step 4:

Retrieved from "https://biu.miraheze.org/wiki/MRI_Google_System?oldid=121"